Raw Materials

Home	Products	Raw Materials	Contact us

Products :

Our standard product range comprises the following,

	Bright Bars

	Coils

	Ground Bars

	Hexagonal

	Square

	Peeled Bars

	Cut Length Bars

	Components

Bright Drawn, Peeled, Ground Bars And Component Manufacturers.

Raw Materials

We are regularly holding stock of the following raw materials in mild steels/ carbon steels/ free cutting steels/ leaded steels/ alloy steels.

The following grades can be supplied as black bars/BRIGHT BARS/PEELED BARS/BRIGHT COILS or in cut lengths from 50 to 5000mm.

MILD STEELS / CARBON STEELS

Grades : EN3B, EN32B, SAE1018, SAE1010, EN8, EN8A, EN8D, C40, CK45, EN9, C50, etc.,

FREE CUTTING STEEL

Grades : EN1ANL, EN1AL, En8M, En15AM, SAE 1215, SAE 12L14, etc.,

ALLOY STEELS

Grades : EN16,EN 19,EN24,EN31,EN353, SAE 8620, SAE52100, 16MNCR5, 20MNCR5, etc.,

PRODUCTION CAPACITY

Drawn bright bar capacity : 16mm to 63mm
Peeled bright bars : 16mm to 63mm
Cold drawn coils : 5.0mm to 20.00mm
Ground bars : 14mm to 63mm
Hexagons : 5mm to 40mm
Square : 5mm to 40mm

WEIGHT CALCULATION in Kgs
Rounds	Dia (mm) x Dia (mm) x Length (m) x 0.00617
Flat / Square / Plat	Size (mm) x Size (mm) x Length (m) x 0.00785
Hexagon	Size (mm) x Size (mm) x Length (m) x 0.0068

Lengths :

Material supplied in Standard Lengths (3mtrs) or In Economical Lengths or In Cut Lengths.

Surface Coated Bars :

Bars in Chrome Plated, Black Burnished, Zinc Coated conditions can be supplied.

Range :

We regularly produce Mild Carbon, Free Cutting, Leaded, Bearing and Alloy Steels.

If you require further Information, Please click below. We would be Delighted to assist you with your requirement
Contact us

CHEMICAL COMPOSITION

Grade	Chemical Composition									Equal Grades
Grade	C	MN	Si	S	P	Pb	NI	MO	CR	IS-1570-1961	SAE/AISI	DIN	AFNOR	ASP	EN
En3B	.25MAX	1.0MAX	.35MAX	.06MAX	.06MAX
EN32B	.10/.18	.70/1.10	.05/.35	.07MAX	.05MAX					1015	CK15	XC12
SAE1010	0.08/0.13	0.30/0.60	0.10MAX	0.030MAX	0.030MAX					Co7		St 0,1	XC10		EN2
SAE1018	0.15/0.20	0.60/0.80	0.10MAX	0.040MAX	0.040MAX							H 111			EN2C
EN8	.35/.45	.60/1.0	.05/.35	.06MAX	0.60MAX					C-40	1038/1040	CK35/40MN4	x-C 38
EN8A	.33/.38	.70/.90	.05/.35	.06MAX	0.60MAX
EN8D	.40/.45	.70/.90	.05/.35	.06MAX	0.60MAX
C40	.35/.45	.60/.90	.30MAX	.030MAX	.030MAX						1040	CK35/40MN4			EN8
CK45	.40/.50	.60/.90	.15/.35	.050max	.050max					C - 45	1045		Xc45 Xc48	CI-4	EN43B
EN9	.50/.60	.50/.80	.05/.35	.05MAX	.05MAX					C - 46	1055	CK-50	CC55F
C50	.45/.55	.60/.90	.30MAX	.030MAX	.030MAX					C - 47	1049	C 53	XC50,XC54
En1ANL	.07/.15	.80/1.20	.10max	0.2/0.3	.077max					C - 48	1113	9527	12mf4
En1AL	0.07/0.15	0.8/1.20	.10max	0.20/0.30	0.07MAX	0.15/0.35					12L14	9SMnPb36
En8M	.35/.45	.9/1.30	.25max	.12/20	.06max					40S18	1139
En15Am	.30/.40	1.3/1.7	.05/.35	.06max	.06max					40mnn2s12	1137
SAE1215	0.09MAX	0.75/1.05		0.26/0.35	0.04/0.09							9SMn28			EN1A
SAE12L14	0.07/0.15	0.8/1.20		0.20/0.30	0.07MAX	0.15/0.35						9SMnPb28			EN1AL
EN16	.30/.40	1.3/1.8	.10/.35	.06MAX	.06MAX					35MN2MO26			20MD5	MT6
EN19	.35/.45	.50/.80	.10/.35	.05MAX	.05MAX			.20/.35	.90/1.20	40CR1MO28	4140/4142		42CD4	HT-1
EN24	.35/.45	.45/.70	.10/.35	.05MAX	.05MAX		1.3/1.8	.20/.35	.90/1.40	40N2CR`NC25	4340	34CRN1MO5	35NCD6	HT-2
EN31	.90/1.20	.30/.75	.10/.35	.05MAX	.05MAX					103CR1	52100	100CR6
EN353	.20MAX	.50/1.0	.35MAX	.05MAX	.05MAX		1.0/1.5	.08/.15	.75/1.25	15NICR1MO12			18NCD6	CH-9
SAE8620	.18/.23	.70/.90	.20/.35	.04MAX	.04MAX					20Ni55Cr50Mo		21NiCrMo2	20NCD2		EN362
SAE52100	.98/1.1	0.25	0.15	0.015MAX	0.25MAX					40Ni55Cr50Mo		21NiCrMo22	40NCD2		EN363
16MNCR5	.14/.19	1.00/1.30	.10/.35	.04MAX	.04MAX				.80/1.10	17MN1CR95	5120		16MC5
20MNCR5	.17/.22	1..00/1.40	.10/.35	.04MAX	.04MAX				1.00/1.30	20MNCR1			20MC5

© Copyright mohanindustry.com \| powered by gvgraphics.net

Content on this page requires a newer version of Adobe Flash Player.